Bullet Point - WIFI & APP :WIFI smart controller supports both IOS & Android WIFI supports 2.4GHz Wi-Fi router; - Free APP InkbirdSmart which is able to monitor temperature at any time; - Dual Relay Output : Dual relay output, which can connect heating and cooling device at the same time; - Alarm for Safe : High/Low temperature limit setting alarm; - Convenient Design : Plug-n-play, easy to use. Feature - Plug and play design, easy to use. Support reading with Centigrade or Fahrenheit.
Maximum output load: 2200W(220V) - Temperature calibration, Compressor delay protection for refrigeration control. High and low temperature alarms are available. Dual relay output, be able to connect with refrigeration and heating equipment at the same time. Dual display window, be able to display measured temperature and set temperature at the same time.
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Power: Voltage: 100230Vac50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac), 2200W(220Vac) - Type of temperature probe: R25=100K±1%, R0=26.7427.83K, B25/85=3435K±1% - Temperature measurement range:-40100/-40212 - Temperature display accuracy: 0.1 /. IHC-200WiFi : Inkbird Digital Wi-Fi Humidity Controller, Dual Outlet Pre-Wired Humidistat for Home Brewing, Fermentation, Breeding, Incubation, Greenhouse, Support Humidifier, Dehumidifier, Fan, iOS & Andriod Description. Dual Relay Output: Support both humidifying equipment and dehumidifying equipment. Humidity measurement range : 10 99% RH.
Relative humidity accuracy: ± 3% RH ± 5% RH. Plug-n-Play : No complicated installation required. Dual display Windows : Display the set humidity value and the measured humidity value at the same time with 2 screens. Humidity calibration : Support humidity calibration and dehumidification control delay protection.
High/Low Humidity Alarm : Set a High/Low Humidity Alarm, alarms and reminds you if the humidity value exceeds the setting value, alarms when a probe error occurs. Voltage: 100-230Vac 50/60Hz ; Current: 10A - Maximum Power: 1200W(120Vac), 2200W(220Vac) - Humidity Measurement Range: 1099%RH - Humidity Display Accuracy: 0.1%RH - Relative Humidity Accuracy(10% to 95%RH): Typ: ±3%RH, Max: ±5%RH - Display Unit: %RH - Operating Ambient Temperature: -2040/-4104 - Storage Temperature: 060/32140 - Storage Humidity: 2080%RH(not frozen or dewed) - Waterproof Grade: not waterproof - Wireless Connection: Wi-Fi Connection.
Do not put probes into water, it may lead to inaccurate measurements. Only support 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n). Connect with humidifier and dehumidifier, Work 1 socket for humidifier, Work 2 socket for dehumidifier. The humidity range you want to control is: 6070%Rh, then you can set HS=65%RH, HD=5, DD=5. When Ambient humidity is higher than 70%RH(HS+DD), it will turn on the dehumidifier, turn off at 65%Rh.When Ambient humidity is lower than 60%RH(HS-DD), it will turn on the humidifier, turn off at 65%Rh. Package Contents(Depends on your order). 1 x ITC-308WiFi Temperature Controller(UK Plug). 1 x ITC-308WiFi User Manual.
Temp Humid Controller: 308WiFi+200WiFi Package. The item "Inkbird Prewired 2.4G Wifi Humidity Temperature Controller Thermostat Humidistat" is in sale since Friday, July 10, 2020. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Thermostats\Programmable Thermostats".ou" and is located in Leicester Leicestershire LE67 1LD. This item can be shipped to United Kingdom.