Electric Motorized Projector Lifter Ceiling Mount Bracket Lift + Remote Control

  

Load: 10 kg Baseplate: 50x50 cm Dimension: 50x50x35 cm Weight: 17 kg Package Content 1 X Lift Projector Application: This projector lifter is used at school, assembly room and another. The projector lift can put the projector hidden, and this lift included a remote control, so it will be more beautiful and more convenience. Electric Motorized Projector Lifter Ceiling Mount Bracket Lift + Remote Control.

Designed for total concealment of projector. Heavy duty construction: 10 kg. Integrates with most control systems: IR remote control and manual control button.

Space for cable management and projector mounting bracket must be considered when ordering. This projector lifter is used at school, assembly room and another.

1 Confirm the installation location of the lift based on the screen size and projector focal, then make a ceilings hole (47 cm × 47cm) (This size is only for suggestion, you can adjust if you have special requirement). 2 Confirm the mounting holes based on decorative plate size.

With the four pieces M8 × 12 screws explosion, to set down the hanger mounting plate. 3 Put the projector lift into the mounting plate, and use four pieces M6 × 12 screws to tighten. 4 Electronic limit switch, memory positioning.

5 Install decorative floor, adjust the screw to make decorative plate parallel to the ceiling. 6 Installation universal head, fixed projector. 7 Strictly in accordance with traces schematic wiring to prevent pinch-off. The load of this lift is 10kg, the unilateral dimension of the projector can not more than 42cm, if the thickness of projector is 10cm, the minimum full hide thickness (install thickness) is 37cm, every projector thickness adds 1cm, and the install thickness adds 1cm accordingly.

The standard base plate is 5050cm, opening size is 4747cm. Please confirm this data when you order so that you can use it. Note: The limit safety screw cannot be moved.

It plays a protective role of the travel limit and is a key part of the safe and stable operation of the equipment. The lifting must be adjusted through the remote control handle, and the manual switch cannot be used to control the lifting. After hoisting, be sure to reset the upper and lower limits through the remote control handle.

Note:This type of railing is not suitable for installation in coastal areas, and it can rust quickly. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received.

Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.